Styles: 10 Mistakes that Most People Make

Music T-Shirts DIY Style Tips and Tricks

You can make it yourself the music shirts that this article will show you how especially if you are fond of doing it. Making these shirts fantastically quick need to have these number of tricks.

Here are the following ways to do music shirts you just have to follow the procedure.

This method will not use a transfer paper. The disadvantage of using transfer papers when you wash the shirt the image comes off. You can use this method to make any type of other shirts other than music shirts. By the way you can use vinyl for making these musically shirts.
If You Think You Understand Trends, Then Read This

Use iron on transfer vinyl is the only method we are going to use. Print out the images that you want to put on the shirt is the first thing that you want to do. You can print out a music logo as well as you can put your name on it. Resizing in word document the logo is possible. Cut the music logo then trace that on to a piece of a red glitter vinyl. After cutting the piece of vinyl make sure to duct tape it down to your cutting mat. Put a duct tape as well on to your music logo. After you stuck it down you can then trace around it. When you’re tracing around it you just want to make sure that you don’t go through the whole thing. You just want to make sure that you don’t touch the plastic layer instead the final layer. Peel off the excess vinyl. Keep in mind that you can’t layer the stuff on top of each other so take the music logo and cut it out the little symbol out of it carefully. Make sure to flip it again and cut the part out of the red circle. Out of the white part cut another music logo. Now you should have your white piece and also your red piece.
Case Study: My Experience With Shirts

It adds a lot to it even though this is the hardest part the cutting out of your username. You can make it in word document to resize it. With a hobby knife you can cut the inside of each individual letter. So following the same steps before you just have to take the vinyl and put the shiny side down. Then duct tape it to your cutting mat and took the stencil that you made. All of the letters should be arranged backwards by just flipping it backwards all of the letters. Each individual letters should be cut out. Try it on the shirt and mark where you want the logo to go once all the vinyl pieces are done. The music logo and your username can be ironed on the shirt directly.

Try now and see how easy you can make it.

Comments are closed.